Some cards support both 2.4Ghz and 5.0Ghz, such as WLE200NX (Atheros AR9280) but not simultaneously. You can have both simultaneously, but you need 2 cards, one for each band. PfSense works with 2.4Ghz and 5Ghz bands. Switch to Operating System based on Linux, such as OpenWRT or IPFire.Get an external Access Point and connect it to your pfSense box.If you must have 802.11ac support, then we have 2 recommendations: All router Operating Systems based on BSD (OPNSense, pfSense, etc) have this limitation. PfSense is based on FreeBSD, and that operating system doesn't have any support for the more recent Wi-Fi standards. There's currently zero support for 802.11ac in pfSense 2.6, and it's likely not going to change any time soon. Other cards often achieve less than half of this speed. We have tested pfSense with WLE200NX and achieved about 130Mbit/s throughput using 5Ghz, and channel 36. In addition, some cards will work only as a client, while you want to use them as an access point. Some 802.11n adapters are detected as 802.11g and won't work at full speed. PfSense supports Wi-Fi standards up to 802.11na (2.4Ghz and 5Ghz), if you have an adapter that works well. So if you want to have solid Wi-Fi with pfSense, you have to choose your hardware carefully. And there's an even more limited number of well-working cards. The first thing you need to know about setting up pfSense as a Wi-Fi router is that pfSense supports a limited number of wireless cards. So you want to have a Wi-Fi access point in your pfSense box? This article was last updated on December 29, 2022.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |